Processing a Refill Prescription

When processing a refill prescription, it will transition through the following Workflow queues:

Depending on your Workflow Preferences, when processing a refill prescription, it may transition through the following Workflow queues:

  • Data Entry

  • Packaging

  • Technical Validation

  • Clinical Review

Once a prescription is completed, it will appear in one, or both, of the following tiles:

  • Pick Up/Delivery

  • Dialogue - if the Dialogue Required checkbox is selected during Clinical Review or Technical Validation.

Once a prescription is completed, it may appear in one, or both, of the following tiles:

  • Pick Up/Delivery - if POS Integration is activated, or if it is a diem health prescription.

  • Dialogue - if E-Dialogue is set to New or All in Workflow Preferences and if the Dialogue Required checkbox is selected during Clinical Review or Technical Validation.

Processing a refill can be completed from either the Workbench or the patient's Profile tab.

Data Entry

For refill prescriptions, the Data Entry queue includes:

  • Using the Intake window for refill prescriptions and adjudicating them through Rx Detail.

  • Processing and adjudicating prescriptions that were added to the Workbench, either from the Intake window or one of the programs the patient is enrolled in or your pharmacy is registered for.

    For more information about prescriptions that are already in the Data Entry queue, see Processing Prescriptions from the Data Entry Queue.

Select the applicable tab to learn about processing refill prescriptions in your province.

For more information, use the dropdowns below.

To refill a prescription from the Workbench:

  1. From the Workbench, select Intake. The Intake window appears.

  2. Do one of the following:

    • In the Refill Rx field, enter the prescription number and press Enter on your keyboard. If entering multiple prescription numbers, separate them using a forward slash (/).

    • Select the Profile button. Highlight the prescription(s) that are being refilled and select Refill. A R indicator appears beside the prescription(s) selected for refill. Select OK.

    Information is automatically populated in the Patient, Prescriber and Drug sections based on the information from the prescription(s).

    If you're only collecting the prescription from the patient and the prescription is being adjudicated at another workstation, or at another time, once you have a patient selected, you can select Add to Workbench. This adds the prescription to the Data Entry queue for later processing. It is recommended a prescription is scanned at Intake before doing this.

    For more information about processing this prescription at another workstation or at a later time, see Processing Prescriptions from the Data Entry Queue.

  3. Select Process. The prescription opens in Rx Detail.

  4. Verify the information in Rx Detail and make any necessary changes.

    If Close is selected when in Rx Detail, the prescription remains in the Data Entry queue and can be accessed from there.

  5. Select Fill to adjudicate the prescription.

  6. The patient's PharmaNet Profile opens. The Profile displays information about the patient's clinical conditions, adverse reactions, and prescription history. You must view the last 15 clinical conditions, adverse reactions, and prescription records before the OK button is enabled.

    When filling a succession of prescriptions, the PharmaNet Profile displays only once before the first prescription is filled.

  7. Select OK.

  8. The TAC/TDU Response window opens. It shows the response from PharmaNet for the submitted prescription and the patient's historical data related to the drug. The window is read only and cannot be modified. Use the arrow button to review each page, if there is more than one. Select OK.

    The TAC/TDU Response window appears for each prescription that is processed. Batched prescriptions are not completed until the TAC/TDU Response windows are viewed.

  9. The Claim Summary window opens. Information from PharmaNet is displayed in the Claim Response Message section including:

    • Plan information (i.e. expiry date)

    • Pricing information (i.e. LCA/RBP pricing, fee)

    • Drug information (i.e. special authority, benefit status)

    • Restrictions

    Review the window and make any necessary waives.

    The PharmaNet response messages are not stored in the prescription. This means you cannot detail the prescription afterwards to view the messages. Codes are printed on the receipt which correspond to the messages.

  10. Select OK.

To refill a prescription from the patient's Profile tab:

  1. Search for and select a patient.

  2. Select the Profile tab.

  3. Highlight the prescription(s) that need to be refilled.

  4. Select Refill. The prescription(s) open in Rx Detail.

  5. Verify the information in Rx Detail and make any necessary changes.

    If Close is selected when in Rx Detail, the prescription remains in the Data Entry queue and can be accessed from there. For more information, see Processing Prescriptions from the Data Entry Queue.

  6. Select Fill to adjudicate the prescription.

  7. The patient's PharmaNet Profile opens. The Profile displays information about the patient's clinical conditions, adverse reactions, and prescription history. You must view the last 15 clinical conditions, adverse reactions, and prescription records before the OK button is enabled.

  8. Select OK.

  9. The TAC/TDU Response window opens. It shows the response from PharmaNet for the submitted prescription and the patient's historical data related to the drug. The window is read only and cannot be modified. Use the arrow button to review each page, if there is more than one. Select OK.

    The TAC/TDU Response window appears for each prescription that is processed. Batched prescriptions will not complete until the TAC/TDU Response window is viewed.

  10. The Claim Summary window opens. Information from PharmaNet is displayed in the Claim Response Message section including:

    • Plan information (i.e. expiry date)

    • Pricing information (i.e. LCA/RBP pricing, fee)

    • Drug information (i.e. special authority, benefit status)

    • Restrictions

    Review the window and make any necessary waives.

    The PharmaNet response messages are not stored in the prescription. This means you cannot detail the prescription afterwards to view the messages. Codes are printed on the receipt which correspond to the messages.

  11. Select OK.

Next Steps?

Once the prescription has been processed, inventory is deducted from the Drug Folder and the prescription moves into the Packaging queue to be packaged.

Once the prescription has been processed, inventory is deducted from the Drug Folder if the drug is monitored and the prescription moves into the next queue as outlined in your Workflow Tab. Click on the links below depending on what the next queue is for your pharmacy.

  • Packaging

  • Packaging (Mixture)

  • Technical Validation

  • Clinical Review

  • No queues activated - the prescription is completed and a hardcopy (half label) prints.

    The prescription will appear in the Pick Up/Delivery tile if:

    • Your pharmacy has POS Integration activated.

    • Your pharmacy does not have POS Integration activated but the prescription is a diem health prescription, allowing you to send notifications to your patient that the prescription is ready. For more information, see Rx Ready diem health Notifications.

    Based on your Workflow Preferences for E-Dialogue, the prescription may display on the Dialogue tile.

For more information, use the dropdowns below.

To refill a prescription from the Workbench:

  1. From the Workbench, select Intake. The Intake window appears.

  2. Do one of the following:

    • In the Refill Rx field, enter the prescription number and press Enter on your keyboard. If entering multiple prescription numbers, separate them using a forward slash (/).

    • Select the Profile button. Highlight the prescription(s) that are being refilled and select Refill. A R indicator appears beside the prescription(s) selected for refill. Select OK.

    Information is automatically populated in the Patient, Prescriber and Drug sections based on the information from the prescription(s).

    If you're only collecting the prescription from the patient and the prescription is being adjudicated at another workstation, or at another time, once you have a patient selected, you can select Add to Workbench. This adds the prescription to the Data Entry queue for later processing. It is recommended a prescription is scanned at Intake before doing this.

    For more information about processing this prescription at another workstation or at a later time, see Processing Prescriptions from the Data Entry Queue.

  3. Select Process. The prescription opens in Rx Detail.

  4. The Patient EHR Access Reason window opens if the patient's EHR Profile has not been viewed yet. Select a reason for accessing the patient's EHR Profile and enter any additional comments if needed. Select OK.

    Review the patient's EHR Profile and select OK once done.

  5. Verify the information in Rx Detail and make any necessary changes.

    If Close is selected when in Rx Detail, the prescription remains in the Data Entry queue and can be accessed from there.

  6. Select Fill to adjudicate the prescription.

  7. The Claim Summary window opens. Review the window and make any necessary waives.

  8. Select OK.

To refill a prescription from the patient's Profile tab:

  1. Search for and select a patient.

  2. Select the Profile tab.

  3. Highlight the prescription(s) that need to be refilled.

  4. Select Refill. The prescription(s) open in Rx Detail.

  5. The Patient EHR Access Reason window opens if the patient's EHR Profile has not been viewed yet. Select a reason for accessing the patient's EHR Profile and enter any additional comments if needed. Select OK.

    Review the patient's EHR Profile and select OK once done.

  6. Verify the information in Rx Detail and make any necessary changes.

    If Close is selected when in Rx Detail, the prescription remains in the Data Entry queue and can be accessed from there. For more information, see Processing Prescriptions from the Data Entry Queue.

  7. Select Fill to adjudicate the prescription.

  8. The Claim Summary window opens. Review the window and make any necessary waives.

  9. Select OK.

Next Steps?

Once the prescription has been processed, inventory is deducted from the Drug Folder and the prescription moves into the Packaging queue to be packaged.

Once the prescription has been processed, inventory is deducted from the Drug Folder if the drug is monitored and the prescription moves into the next queue as outlined in your Workflow Tab. Click on the links below depending on what the next queue is for your pharmacy.

  • Packaging

  • Packaging (Mixture)

  • Technical Validation

  • Clinical Review

  • No queues activated - the prescription is completed and a hardcopy (half label) prints.

    The prescription will appear in the Pick Up/Delivery tile if:

    • Your pharmacy has POS Integration activated.

    • Your pharmacy does not have POS Integration activated but the Pickup message failed to transmit to the EHR or the prescription is a diem health prescription, allowing you to send notifications to your patient that the prescription is ready. For more information, see Rx Ready diem health Notifications.

    Based on your Workflow Preferences for E-Dialogue, the prescription may display on the Dialogue tile.

For more information, use the dropdowns below.

To refill a prescription from the Workbench:

  1. From the Workbench, select Intake. The Intake window appears.

  2. Do one of the following:

    • In the Refill Rx field, enter the prescription number and press Enter on your keyboard. If entering multiple prescription numbers, separate them using a forward slash (/).

    • Select the Profile button. Highlight the prescription(s) that are being refilled and select Refill. A R indicator appears beside the prescription(s) selected for refill. Select OK.

    Information is automatically populated in the Patient, Prescriber and Drug sections based on the information from the prescription(s).

    If you're only collecting the prescription from the patient and the prescription is being adjudicated at another workstation, or at another time, once you have a patient selected, you can select Add to Workbench. This adds the prescription to the Data Entry queue for later processing. It is recommended a prescription is scanned at Intake before doing this.

    For more information about processing this prescription at another workstation or at a later time, see Processing Prescriptions from the Data Entry Queue.

  3. Select Process. The prescription opens in Rx Detail.

  4. Verify the information in Rx Detail and make any necessary changes.

    If Close is selected when in Rx Detail, the prescription remains in the Data Entry queue and can be accessed from there.

  5. Select Fill to adjudicate the prescription.

To refill a prescription from the patient's Profile tab:

  1. Search for and select a patient.

  2. Select the Profile tab.

  3. Highlight the prescription(s) that need to be refilled.

  4. Select Refill. The prescription(s) open in Rx Detail.

  5. Verify the information in Rx Detail and make any necessary changes.

    If Close is selected when in Rx Detail, the prescription remains in the Data Entry queue and can be accessed from there. For more information, see Processing Prescriptions from the Data Entry Queue.

  6. Select Fill to adjudicate the prescription.

Next Steps?

Once the prescription has been processed, inventory is deducted from the Drug Folder and the prescription moves into the Packaging queue to be packaged.

Once the prescription has been processed, inventory is deducted from the Drug Folder if the drug is monitored and the prescription moves into the next queue as outlined in your Workflow Tab. Click on the links below depending on what the next queue is for your pharmacy.

  • Packaging

  • Packaging (Mixture)

  • Technical Validation

  • Clinical Review

  • No queues activated - the prescription is completed and a hardcopy (half label) prints.

    The prescription will appear in the Pick Up/Delivery tile if:

    • Your pharmacy has POS Integration activated.

    • Your pharmacy does not have POS Integration activated but the prescription is a diem health prescription, allowing you to send notifications to your patient that the prescription is ready. For more information, see Rx Ready diem health Notifications.

    Based on your Workflow Preferences for E-Dialogue, the prescription may display on the Dialogue tile.